Skip to content
Track orders, manage your details, and sign in without a password.
- No password required
- We send a secure 6-digit code to your email
- New email? Signing in creates your account automatically
Stay Cool This Summer - 20% OFF Free Shipping 00d : 00h : 00m : 00s
Pool Heater Size Calculator
Free pool heater size calculator — find the right BTU for your swimming pool heat pump
Calculate My Pool SizePool Heater Size Calculator — BTU & Heat Pump Sizing
Use this free pool heater size calculator to find the right BTU output for your swimming pool heat pump. Enter your pool dimensions and heating goals — the calculator handles pool heater sizing instantly and shows estimated heat-up times across our full Apollo lineup. Works for above-ground pools and inground pools, in imperial or metric units.
Why heat your pool with a heat pump? Pool heat pumps deliver 3.5–5× more heat energy than the electricity they consume (COP 3.5–5.0), making them significantly cheaper to run than gas or electric resistance heaters. Apollo EVI models operate down to 14°F (−10°C) — extending your swimming season into early spring and late fall.
Your Results
Your Recommended System
—
—
Estimated Heat-up Time
| Unit | Output | Est. Time for Your Pool |
|---|---|---|
| Apollo 3.5T (Air-to-Water) | 48,000 BTU/h | — |
| Apollo 5T (Air-to-Water) | 60,000 BTU/h | — |
| Apollo 6T (Air-to-Water) | 72,000 BTU/h | — |
EVI Advantage: All Apollo air-to-water units maintain reliable output down to 14°F (−10°C) — ideal for extending your swimming season into early spring and late fall.
Very large pool or want faster heat-up? Running two heat pumps in parallel doubles BTU output — halving heat-up time without oversizing a single unit. Our team can design a dual-unit setup for your pool.
Need help choosing or sizing your system? Our team sizes pool heating systems for free — no obligation.
Full Lineup
Air-to-Water Heat Pumps
EVI technology — works to −10°C
APOLLO Air-to-Water Heat Pump - 3.5 Ton - 42K BTU
48,000 BTU/h — 3.5 Ton
Ideal for above-ground pools and smaller inground pools up to ~12,000 gallons. Efficient pool heater for relaxed 48–72 hour heat-up windows.
APOLLO Air-to-Water Heat Pump - 5 Ton - 60K BTU
60,000 BTU/h — 5 Ton
Strong choice for mid-size inground pools up to ~20,000 gallons. Reaches target temperature within 24–48 hours.
APOLLO Air-to-Water Heat Pump - 6 Ton - 72K BTU
72,000 BTU/h — 6 Ton
Most popular pool heater for large inground pools. 72,000 BTU/h covers pools up to 30,000+ gallons with year-round heating capability.
⚠ Air-to-water units connect to a closed hydronic loop — a titanium or cupro-nickel heat exchanger is required between the unit and your pool water.
Whether sizing a pool heater for a 12,000-gallon above-ground pool or a 40,000-gallon large inground pool, the BTU calculator above gives you an accurate starting point. Most residential inground pools need between 48,000 and 72,000 BTU/h — the Apollo 6-ton air-to-water heat pump is our most popular swimming pool heating solution. Not sure which unit fits your setup? Our team sizes systems at no charge.
System Support
Need help planning the full system?
MBTEK can help match the heat pump, indoor equipment, tanks, controls, and system layout to your project.
Pool Heat Pump FAQ
What size pool heater or heat pump do I need?
The right pool heater size depends on pool volume, desired temperature rise, and how quickly you want to heat up. The standard formula is BTU/h = (gallons × 8.34 × temperature rise °F) ÷ heating hours, with a 25% buffer for ongoing heat loss.
As a rule of thumb, a typical 15×30 ft pool (~17,000 gallons) heated 15°F over 24 hours needs roughly 60,000–72,000 BTU/h. Use the pool heater size calculator above for your exact pool, then browse our Apollo air-to-water lineup to match your result to a unit.
How long will it take to heat my pool?
Initial heat-up takes 24–72 hours depending on pool size, temperature rise, and heat pump capacity. The heat-up time table in the calculator above shows the exact estimate for your pool across all three Apollo air-to-water sizes.
Once at target temperature, maintaining it uses far less energy — the heat pump only compensates for daily losses from evaporation, wind, and radiation. Contact us if you need help choosing the right capacity for your heat-up timeline.
Does a pool cover reduce the size of heat pump I need?
Yes, significantly. A pool cover reduces evaporative heat loss — which accounts for up to 70% of total pool heat loss — by around 30% on average. Toggle the pool cover option in the calculator above to see exactly how much it shifts your BTU requirement.
A cover can mean the difference between needing a 5T or 6T unit. See BTU specs across our Apollo lineup once you have your adjusted number.
What is COP and how does it affect pool heating efficiency?
COP (Coefficient of Performance) measures heat delivered per unit of electricity consumed. A COP of 4.0 means 4 kWh of heat for every 1 kWh of electricity. The Apollo air-to-water series typically achieves COP 3.5–5.0 for pool heating, making running costs significantly lower than gas or electric resistance heaters.
See COP and BTU specs across our full Apollo air-to-water lineup to compare running costs by unit size.
Can I heat my pool in early spring or late fall with an air-to-water heat pump?
Standard heat pumps lose efficiency below 10°C (50°F) and stop below 5°C. The Apollo EVI series maintains reliable output down to 14°F (−10°C), extending your pool season into early spring and late fall at a fraction of gas heating costs.
Do I need a heat exchanger to connect an air-to-water heat pump to my pool?
Yes. Air-to-water units heat a closed hydronic loop and do not connect to open pool plumbing directly. A titanium or cupro-nickel heat exchanger transfers heat to the pool water while protecting the unit from chlorine and bromine damage.
Contact us for help selecting a compatible heat exchanger for your pool setup.
What if my pool requires more than 72,000 BTU/h?
Running two Apollo 6T air-to-water units in parallel on a shared hydronic loop doubles output, scales cleanly, and halves heat-up time without oversizing a single unit.
Our team will design the right multi-unit system for your pool at no charge — call 1-888-301-0737 or use the Contact Us button above.