icon
Affiliate Program

Stay Cool This Summer - 20% OFF Free Shipping

2026 Energize CT rebate guide

Connecticut Air-to-Water Heat Pump Rebates

Connecticut publishes a $250-per-ton standard air-to-water offer and a $1,000-per-ton Energy Optimization path, with enhanced incentives up to $1,500 per ton for certain verified projects.

Model estimates

Estimated Connecticut rebates by APOLLO model

The estimates apply each published per-ton formula to reviewed regional QPL cooling capacities. The selected pathway depends on the existing heating system and verified project conditions.

Estimated 2026 Connecticut air-to-water heat pump rebates in USD
APOLLO model Program-rated or QPL capacity Standard estimated rebateEnergy Optimization estimated rebateEnhanced estimated rebatePublished program cap
APOLLO 3.5 Ton / 42K BTUAP-EVI-DC-3.5T 2.30 QPL tons $575 estimated rebate$2,300 estimated rebate$3,450 estimated rebate$2,500 standard; $10,000 optimization/enhanced
APOLLO 5 Ton / 60K BTUAP-EVI-DC-5T 5.00 QPL tons $1,250 estimated rebate$5,000 estimated rebate$7,500 estimated rebate$2,500 standard; $10,000 optimization/enhanced
APOLLO 6 Ton / 72K BTUAP-EVI-DC-6T 5.50 QPL tons $1,375 estimated rebate$5,500 estimated rebate$8,250 estimated rebate$2,500 standard; $10,000 optimization/enhanced

Every dollar figure is an estimated rebate. Confirm exact model status and tonnage on the current Energize CT QPL. Enhanced electric-resistance estimates can be lower when only part of the system receives the enhanced rate.

Connecticut uses qualified cooling capacity for tonnage

Energize CT states that tonnage is based on AHRI cooling capacity divided by 12,000 BTU and rounded under program rules. That value can differ from the APOLLO commercial product name. These estimates use the reviewed regional QPL values and must be rechecked against the live Energize CT list.

Program pathways

Compare Connecticut incentive pathways

The standard, Energy Optimization and enhanced offers serve different project conditions. Pre-verification is especially important for income and electric-resistance enhancements.

Standard air-to-water offer

$250 per ton, up to $2,500

This path applies to qualifying projects such as replacing an existing heat pump, adding heat to previously unconditioned space or installing for heat without the required integrated controls.

The customer must have eligible Eversource or United Illuminating residential electric service.

Energy Optimization

$1,000 per ton, up to $10,000

For qualifying projects that fully displace or properly integrate natural gas, oil, propane or electric resistance as the primary heating source.

If inspection finds the project does not satisfy the optimization path, the incentive may be modified to the $250-per-ton standard offer.

Enhanced incentive

Up to $1,500 per ton, capped at $10,000

Certain income-qualified households and verified electric-resistance replacement projects may receive the enhanced rate.

Electric-resistance projects require verification before installation, and the enhanced rate may apply only to the verified portion of the system.

Before you buy

Connecticut eligibility checklist

  • The installation address is an eligible Eversource or United Illuminating residential electric account.
  • The equipment will be installed within the participating utility service territory.
  • The complete model is on the current Energize CT Heat Pump Qualified Product List.
  • The installer participates in the Energize CT Heat Pump Installer Network.
  • The existing heating system and planned displacement or integration match the selected incentive path.
  • Income or electric-resistance verification is completed before installation when seeking an enhanced incentive.

Application roadmap

How to apply for a Connecticut air-to-water rebate

  1. Identify the correct incentive path

    Determine whether the project qualifies for the standard air-to-water offer, Energy Optimization or an enhanced pathway.

  2. Complete any required pre-verification

    Verify income or existing electric-resistance heat before installation when required for the enhanced offer.

  3. Hire a participating installer

    Use a contractor in the Energize CT Heat Pump Installer Network and review the existing-system displacement plan.

  4. Verify the exact model and capacity

    Match the complete model to the current QPL and use the program or AHRI cooling capacity for the estimate.

  5. Install and keep a detailed invoice

    The invoice should identify equipment, capacity, installer and the project information required by the program.

  6. Claim the rebate and complete any inspection

    Submit the final paid invoice and cooperate with a post-installation inspection if the project is selected.

Common questions

Connecticut air-to-water rebate FAQ

Which Connecticut rebate path applies to my project?

The path depends on the existing heating system and how it is displaced or integrated. Replacing a primary fossil-fuel or electric-resistance system can qualify for Energy Optimization, while replacement heat pumps and certain other projects use the standard offer.

How were the APOLLO estimates calculated?

The table multiplies 2.30, 5.00 or 5.50 reviewed QPL tons by $250, $1,000 or $1,500 and applies the published program cap.

Is every electric-resistance replacement eligible for $1,500 per ton?

No. Existing electric resistance must be verified before installation, and the enhanced rate can be limited to the portion of the new system that replaces verified resistance heat.

Can the rebate change after inspection?

Yes. Energize CT states that a project submitted for the $1,000-per-ton Energy Optimization offer can be modified to the $250-per-ton standard offer if inspection shows the optimization requirements were not met.

Continue planning

APOLLO products

Review qualified-model candidates

These APOLLO standard models appear on the reviewed regional air-to-water qualified-products record. Confirm the current state-specific list before ordering.

APOLLO 3.5 Ton

42,000 BTU commercial name; program capacity may differ.

View model

APOLLO 5 Ton

60,000 BTU commercial name; use the QPL capacity for estimates.

View model

APOLLO 6 Ton

72,000 BTU commercial name; program tonnage may be lower.

View model

All APOLLO heat pumps

Compare APOLLO heat pump sizes and system applications.

Shop heat pumps
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.